1, ● Lift the opening handle along the arrow, lift the engine cover and open it. ● With the help of pneumatic components, support the engine compartment cover to the top and fix it.
2. The engine cover switch is in the cab, and the light switch is below. You can open the engine cover by pulling the latch, and use the toppost to hold the engine cover. The way to open the Volkswagen Passat engine cover is to lock the hood (hood) and open the handle in the space of the driver's side foot. Pull the handle to open the engine hatch.
3. Grab the hood and lower the cover. When the hood is about 20 to 30 centimeters away from the closed position, gently press down with your hand, and it will close by itself.
4. First, enter the main driver's seat of SAIC Volkswagen's new Passat and find the cover switch under the main driver's seat.Next, you need to pull the switch of the cover of SAIC Volkswagen's new Passat, so that the cover can bounce open.
Volkswagen Passat The fuse box is located on the left side of the driver's seat, and you can see the fuse box when you open the cover.Illustration of the Volkswagen Passat fuse box. This article chooses the fuse box at the cover above the driver's foot. The understanding of the fuse box in other places can refer to this figure.
The fuse of the water jet motor of the Passat car is in the fuse box of the engine compartment. The Volkswagen Passat fuse is located in two places, the lower left of the dial and the front hood near the battery.
The position of the Passat fuse box: the right side of the co-driver's seat glove box, as shown in the figure below.
The fuse of the Passat is in two places, one is in the lower left of the steering wheel, and the other is next to the front hood near the battery.
The function of the fuse is to protect the circuit. When the current of the circuit is too high or the temperature is too high, the fuse can be melted, so as to avoid damage to the circuit. There is usually only one on the car.A safety box. There is a safety box in the engine compartment of ordinary cars, and there is also a safety box in the cockpit. Some cars also have a safety box in the trunk.
Go to the front of the vehicle and find the engine hatch auxiliary release handle. The release handle is located in the middle below the front edge of the hood. Push the engine cover auxiliary release handle to the driver's side of the vehicle. Open the engine cover and pull up the support rod from the fixed sleeve above the radiator.
Illustration of the opening instructions of the front cover of Passat. Open the engine cover: partial view of the driver's side foot space and radiator grilleFigure: Unlock and open the engine hatch position of the engine hatch support rod ● Do not lift the windshield wiper arm away from the windshield glass before opening the engine hatch, otherwise, the paint of the hatch may be damaged.
The engine cover switch is in the cab, and the light switch is below. You can open the engine cover by pulling the latch, and use the toppost to hold the engine cover. The way to open the Volkswagen Passat engine cover is to lock the hood (hood) and open the handle in the space of the driver's side foot. Pull the handle to open the engine hatch.
Passat 8t engine compartment illustration The largest source of pollution in the engine compartment comes from dust, sludge, etc. The bottom of the engine compartment is not completely closed due to its ventilation and cooling requirements, but is connected to the outside world, so rain splashes on the engine or other parts in the engine compartment during driving, or dust spreads throughout the engine compartment.
1. Method/Steps: Find the threading hole, connect the engine compartment, and the specific position of the automatic gear is in the upper left corner of the brake pedal. Lift the sponge to see it. Lift the sponge block with your hands. Lift the sponge block to see a rubber stopper. Remove the rubber stopper and you can see the engine cabin opposite.
2. First of all, due to the need for modification, the wiring from the engine compartment to the cockpit is now threaded under the triangular plastic cover next to the front door. Although the wiring is very convenient, the disadvantages are too obvious. When the door is opened, you will see the wires. Is there a hidden threading method? It's better to provide a photo reference.
3. There is a layer of soundproof cotton in the middle of the engine compartment and the cab. Just penetrate the soundproof cotton directly.
4. The wiring of many models is different, and professional personnel are required to disassemble the wiring, but generally, there is a wiring hole close to the steering mechanism in the engine compartment. The specific operation steps can only be determined after reading.
5. How to make the new Santana. Open the cover and draw a wire along the cover to lead a wire from the cabin to the cockpit. In fact, the method is very simple. First of all, you need to find it. There is a dustproof guard at the money fire protection platform. Plastic rubber cover. The pole is pulled through the rubber sleeve. Put your thread.
6. Park the vehicle in a well-lit place and open the engine compartment. Under the dashboard of the cabWhen the plastic skin on the side is removed, many holes can be seen facing the engine compartment (the light shining in through the engine compartment can be seen). Find a hole dedicated to the wire and put the wire into the engine compartment.
1. First of all, there is a engine compartment wrench under the left side of the main cab. Pull the wrench to open the engine compartment lock. Secondly, find the wrench above the engine cover to lift the engine cover. Finally, let the rod support the engine compartment cover, and you can see the layout of the engine compartment.
2. The middle of the site. According to the official website of Passat, the gearbox bracket is an important part to support the gearbox. In the Passat, the gearbox bracket is located in the middle of the vehicle chassis and is connected to the rear suspension system of the vehicle.Passat is a medium-sized car designed by Volkswagen in Germany. It is classified as a B-class car in the Volkswagen genealogy.
3. The gearbox refueling port of the new Passat is at the bottom of the gearbox. Because each different type of transmission uses different oil, if you need to replace the transmission oil, it is recommended to go back to the manufacturer or 4S store to replace it.
4. The old Shanghai Volkswagen Passat 8t automatic transmission computer board is located in the engine compartment under the hood, next to the battery; find the Passat 8t automatic transmission computer board. The specific operation steps are as follows: open the driver's side door of Shanghai Volkswagen Passat.
5. Place the lever on the "D" gear, and the driver only needs to control the accelerator pedal to control the speed of the car. When driving normally, put the gear lever in position D, and the car can automatically change gears between 1 to 4 gears (or 3 gears).The D position is the most commonly used driving position.
1. ● Do not lift the windshield wiper arm off the windshield glass before opening the engine cover, otherwise, it may damage the cabin. Cover the painted surface. ● Pull the opening handle in the direction of the arrow in the diagram, and the hatch bounces slightly under the action of the spring mechanism. ● Lift the opening handle along the arrow, lift the engine cover and open it.
2. The cover switch is located in the cab, below the light switch. To open the hood, you only need to move the fasteners and use the toppost to support it. The way to open the hood of the Volkswagen Passat is to pull the engine cover lock to open the handle in the foot space on the driver's side.The engine compartment cover has the effect of soundproofing, dustproofing and protecting the engine.
3. First, enter the main driver's seat of SAIC Volkswagen's new Passat and find the cover switch under the main driver's seat. Next, you need to pull the switch of the cover of SAIC Volkswagen's new Passat, so that the cover can bounce open.
Maritime logistics HS code mapping-APP, download it now, new users will receive a novice gift pack.
1, ● Lift the opening handle along the arrow, lift the engine cover and open it. ● With the help of pneumatic components, support the engine compartment cover to the top and fix it.
2. The engine cover switch is in the cab, and the light switch is below. You can open the engine cover by pulling the latch, and use the toppost to hold the engine cover. The way to open the Volkswagen Passat engine cover is to lock the hood (hood) and open the handle in the space of the driver's side foot. Pull the handle to open the engine hatch.
3. Grab the hood and lower the cover. When the hood is about 20 to 30 centimeters away from the closed position, gently press down with your hand, and it will close by itself.
4. First, enter the main driver's seat of SAIC Volkswagen's new Passat and find the cover switch under the main driver's seat.Next, you need to pull the switch of the cover of SAIC Volkswagen's new Passat, so that the cover can bounce open.
Volkswagen Passat The fuse box is located on the left side of the driver's seat, and you can see the fuse box when you open the cover.Illustration of the Volkswagen Passat fuse box. This article chooses the fuse box at the cover above the driver's foot. The understanding of the fuse box in other places can refer to this figure.
The fuse of the water jet motor of the Passat car is in the fuse box of the engine compartment. The Volkswagen Passat fuse is located in two places, the lower left of the dial and the front hood near the battery.
The position of the Passat fuse box: the right side of the co-driver's seat glove box, as shown in the figure below.
The fuse of the Passat is in two places, one is in the lower left of the steering wheel, and the other is next to the front hood near the battery.
The function of the fuse is to protect the circuit. When the current of the circuit is too high or the temperature is too high, the fuse can be melted, so as to avoid damage to the circuit. There is usually only one on the car.A safety box. There is a safety box in the engine compartment of ordinary cars, and there is also a safety box in the cockpit. Some cars also have a safety box in the trunk.
Go to the front of the vehicle and find the engine hatch auxiliary release handle. The release handle is located in the middle below the front edge of the hood. Push the engine cover auxiliary release handle to the driver's side of the vehicle. Open the engine cover and pull up the support rod from the fixed sleeve above the radiator.
Illustration of the opening instructions of the front cover of Passat. Open the engine cover: partial view of the driver's side foot space and radiator grilleFigure: Unlock and open the engine hatch position of the engine hatch support rod ● Do not lift the windshield wiper arm away from the windshield glass before opening the engine hatch, otherwise, the paint of the hatch may be damaged.
The engine cover switch is in the cab, and the light switch is below. You can open the engine cover by pulling the latch, and use the toppost to hold the engine cover. The way to open the Volkswagen Passat engine cover is to lock the hood (hood) and open the handle in the space of the driver's side foot. Pull the handle to open the engine hatch.
Passat 8t engine compartment illustration The largest source of pollution in the engine compartment comes from dust, sludge, etc. The bottom of the engine compartment is not completely closed due to its ventilation and cooling requirements, but is connected to the outside world, so rain splashes on the engine or other parts in the engine compartment during driving, or dust spreads throughout the engine compartment.
1. Method/Steps: Find the threading hole, connect the engine compartment, and the specific position of the automatic gear is in the upper left corner of the brake pedal. Lift the sponge to see it. Lift the sponge block with your hands. Lift the sponge block to see a rubber stopper. Remove the rubber stopper and you can see the engine cabin opposite.
2. First of all, due to the need for modification, the wiring from the engine compartment to the cockpit is now threaded under the triangular plastic cover next to the front door. Although the wiring is very convenient, the disadvantages are too obvious. When the door is opened, you will see the wires. Is there a hidden threading method? It's better to provide a photo reference.
3. There is a layer of soundproof cotton in the middle of the engine compartment and the cab. Just penetrate the soundproof cotton directly.
4. The wiring of many models is different, and professional personnel are required to disassemble the wiring, but generally, there is a wiring hole close to the steering mechanism in the engine compartment. The specific operation steps can only be determined after reading.
5. How to make the new Santana. Open the cover and draw a wire along the cover to lead a wire from the cabin to the cockpit. In fact, the method is very simple. First of all, you need to find it. There is a dustproof guard at the money fire protection platform. Plastic rubber cover. The pole is pulled through the rubber sleeve. Put your thread.
6. Park the vehicle in a well-lit place and open the engine compartment. Under the dashboard of the cabWhen the plastic skin on the side is removed, many holes can be seen facing the engine compartment (the light shining in through the engine compartment can be seen). Find a hole dedicated to the wire and put the wire into the engine compartment.
1. First of all, there is a engine compartment wrench under the left side of the main cab. Pull the wrench to open the engine compartment lock. Secondly, find the wrench above the engine cover to lift the engine cover. Finally, let the rod support the engine compartment cover, and you can see the layout of the engine compartment.
2. The middle of the site. According to the official website of Passat, the gearbox bracket is an important part to support the gearbox. In the Passat, the gearbox bracket is located in the middle of the vehicle chassis and is connected to the rear suspension system of the vehicle.Passat is a medium-sized car designed by Volkswagen in Germany. It is classified as a B-class car in the Volkswagen genealogy.
3. The gearbox refueling port of the new Passat is at the bottom of the gearbox. Because each different type of transmission uses different oil, if you need to replace the transmission oil, it is recommended to go back to the manufacturer or 4S store to replace it.
4. The old Shanghai Volkswagen Passat 8t automatic transmission computer board is located in the engine compartment under the hood, next to the battery; find the Passat 8t automatic transmission computer board. The specific operation steps are as follows: open the driver's side door of Shanghai Volkswagen Passat.
5. Place the lever on the "D" gear, and the driver only needs to control the accelerator pedal to control the speed of the car. When driving normally, put the gear lever in position D, and the car can automatically change gears between 1 to 4 gears (or 3 gears).The D position is the most commonly used driving position.
1. ● Do not lift the windshield wiper arm off the windshield glass before opening the engine cover, otherwise, it may damage the cabin. Cover the painted surface. ● Pull the opening handle in the direction of the arrow in the diagram, and the hatch bounces slightly under the action of the spring mechanism. ● Lift the opening handle along the arrow, lift the engine cover and open it.
2. The cover switch is located in the cab, below the light switch. To open the hood, you only need to move the fasteners and use the toppost to support it. The way to open the hood of the Volkswagen Passat is to pull the engine cover lock to open the handle in the foot space on the driver's side.The engine compartment cover has the effect of soundproofing, dustproofing and protecting the engine.
3. First, enter the main driver's seat of SAIC Volkswagen's new Passat and find the cover switch under the main driver's seat. Next, you need to pull the switch of the cover of SAIC Volkswagen's new Passat, so that the cover can bounce open.
Advanced shipment lead time analysis
author: 2024-12-23 23:21HS code-based KPI reporting for trade teams
author: 2024-12-23 23:04Detailed trade data mapping tools
author: 2024-12-23 22:58Trade data for intellectual property checks
author: 2024-12-23 22:37Global sourcing risk by HS code
author: 2024-12-23 21:41How to comply with export quotas
author: 2024-12-23 22:56Industrial chemicals HS code monitoring
author: 2024-12-23 22:27Import data by HS code and country
author: 2024-12-23 22:06595.23MB
Check186.68MB
Check262.27MB
Check116.96MB
Check779.93MB
Check813.84MB
Check829.52MB
Check662.26MB
Check195.18MB
Check653.84MB
Check242.93MB
Check725.97MB
Check812.22MB
Check693.82MB
Check635.34MB
Check149.19MB
Check484.63MB
Check796.34MB
Check942.84MB
Check817.58MB
Check952.18MB
Check828.63MB
Check299.84MB
Check912.83MB
Check337.55MB
Check224.76MB
Check747.33MB
Check194.69MB
Check349.71MB
Check291.19MB
Check315.83MB
Check351.26MB
Check566.28MB
Check471.22MB
Check139.15MB
Check899.75MB
CheckScan to install
Maritime logistics HS code mapping to discover more
Netizen comments More
189 Fish and seafood HS code mapping
2024-12-23 23:08 recommend
1660 HS code-based cargo insurance optimization
2024-12-23 22:33 recommend
614 Real-time trade document filing
2024-12-23 22:03 recommend
206 Minimizing duties via HS code optimization
2024-12-23 21:55 recommend
2529 Processed seafood HS code references
2024-12-23 21:28 recommend