Enhanced supplier vetting processes

List of the contents of this article:

• 1,Enhanced supplier vetting processes How to start a car
• 2, How to start a car
• 3, How to start the car?The correct ignition steps of the car (starting the engine method)
• 4, How does the car start

How does the car start

After getting the car, put the gear in neutral and step on the brake and clutch at the same time. Then turn the key to on gear and wait for the engine self-inspection to start the car. After waiting for 30 seconds, check the dashboard for any faults. If there is no abnormality, you can leave.

The key needs to be insertedHang in P gear, step on the brake pedal, and unsew the key to start the engine. If the gear is not in p gear or do not step on the brake pedal, you can't start the engine. 3 If it is a manual transmission car, you don't need to step on the brake pedal when starting the engine. You need to step on the clutch pedal to the end, and then start the engine.

How to start the car is as follows: 1. Automatic gearshift car: The automatic gearshift car needs to look around the vehicle, open the door after confirming the safety, confirm that the gear is in front of the parking gear, step on the brake, and then press the button to start the button. The car will idle for about 30 seconds, check whether the indicator light on the dashboard is abnormal, check whether it is in D gear, and prepare to drive.

The correct order to start the car: turn the key to the connection position. Step on the foot brake and pull the gear from P gear to N gear. Release the foot brake, turn the ignition key to the ignition gear, and start the engine.Step on the foot brake, release the handbrake, and pull the gear from N to D.

The specific operation steps for starting the car are as follows: before starting the car, it should be in a void, and shake it left and right to ensure that it is in the position of the idle gear. When starting, step on the clutch with your left foot and step on the foot brake with your right foot. Turn the ignition switch to the right with your right hand. After the circuit is turned on, the light on the dashboard will turn on.

Steps to start the car correctly: 1. After getting on the car, adjust the seat to suit you, and then fasten the seat belt. Start the car, then step on the clutch with your left foot and hang the first gear. Turn on the left turn signal and signal with the horn.

How to start the car

1. Connect and start If there is a car with you when you encounter a situation and there is a cross cable on the car, you can also use the battery connection method to start the vehicle.For specific operation, bring the two cars close to each other until the span cable is enough to connect the positive and negative poles of the two batteries.

2. The correct steps for novice drivers are to adjust the position, the front and rear distance, and the manual gear mainly adjusts the left foot. After the sole of the foot steps on the clutch to the end, the foot is slightly spare. Automatic gear adjustment trottle. If the foot is well adjusted, there will generally be no big problem with the hand, and the hand is convenient to operate the steering wheel.

3. Automatic transmission car means that there is no need to manually shift gears when driving. The vehicle intelligent system will select the appropriate gear according to the traffic situation and speed.

4. Manual transmission car: Before getting on the car, you need to check the surrounding environment to ensure safety. After getting on the car, put the gear in neutral gear and step on the brake and clutch at the same time. Then turn the key to on gear and wait for the engine self-inspection to start the car.After waiting for 30 seconds, check the dashboard for any faults. If there is no abnormality, you can leave.

How to start the car? The correct ignition steps of the car (starting the engine method)

1. Check the engine oil. Before starting the car, first check the engine oil to ensure that the quality and quantity of the oil meet the requirements. The car engine oil must be kept between the lowest marking line and the highest marking line of the fuel tank, otherwise it will affect the normal operation of the engine and even get stuck.

2. The steps for car ignition are: step on the clutch and wait for 5 to 8 seconds when turning the ignition key to the ON position; then turn the key to the starting position to start the engine;After the engine starts smoothly, release the ignition key and let it automatically return to the ON position.

3. Before driving next time, check the gear position and start the car correctly. Step 1 Insert the key and rotate to acc. Wait for about 2 to 3 seconds. Let the main power supply relay contact firmly. 2 Turn the key to on and wait for 6 to 10 seconds. Let the oil pump relay absorb. 3 Turn the key to start to the engine. Just return to on after continuous operation.

4. Because automatic transmission cars are easier to operate than manual transmission cars, many people now prefer to choose automatic transmission cars, but automatic transmission cars only have two pedals, accelerator and brake. So what if you light an automatic transmission car? There are two ways to start an automatic transmission car: using the car key and pressing the one-button start button in the car.

5. The correct way to ignite the car is to step on the clutch deeply, turn the ignition key to the ON position, wait for 5 to 8 seconds, and then turn the key to the start position to start the engine; once the engine starts smoothly, you should immediately release the ignition key and let it automatically return to the ON position.

6. The correct way to ignite the car is as follows: insert the ignition key and screw it to "start" When the vehicle starts, the instrument indicator light will turn on for a short time and then turn off, and the new car computer will enter the self-inspection state (about 6 seconds). If the fault light is still on after the end, you need to turn off the engine and troubleshoot before restarting the engine.

How to start a car Move

Question 4: How to start the car? Insert the key, turn on one grid clockwise, turn on the power, wait for about 6-10 seconds, and then lower the clutch pedal, turn the key clockwise, start the car, release the key, then release the clutch pedal, and warm up the engine for 1-3 minutes. Zhong, it's best to get off the clutch pedal, hang the gear, and start.

Ignition switch Ignition switch is the last step of starting the car. When operating, the ignition should be turned on.Turn off to the "start" position. Because the position of the ignition switch is generally high, you should pay attention to be precise when operating, otherwise accidents may occur.

You need to insert the key to the P gear, step on the brake pedal, and unsew the key to start the engine. If the gear is not in the p gear or does not step on the brake pedal, the engine cannot be started. 3 If it is a manual transmission car, you don't need to step on the brake pedal when starting the engine, and you need to step on the clutch pedal to the end. Then start the engine.

To start the engine, first turn on the vehicle ignition system and put the key in the allowed position of the ignition system. Rotate the key to start the engine, and then the engine should be able to start within 2 minutes. If the engine cannot start within 2 minutes, please check the oil, ignition system, etc.

Before starting the car, hang the idle gear and shake it left and right to make sure it is in the idle position.The specific method is shown in the figure below. When starting, step on the clutch with your left foot and step on the foot brake with your right foot. Turn the ignition switch to the right with your right hand. After the circuit is turned on, the light on the dashboard will turn on.

Manual transmission car: Before getting on the car, you need to check the surrounding environment to ensure safety. After getting on the car, put the gear in neutral gear and step on the brake and clutch at the same time. Then turn the key to on gear and wait for the engine self-inspection to start the car. After waiting for 30 seconds, check the dashboard for any faults. If there is no abnormality, you can leave.