Pharma finished goods HS code references

List of the catalog of this article:

• 1. How to deal with car scratches
• 2. What should I do if the car body is scratched?
• 3, Tips on how to remove common body scratches
• 4, How to deal with car scratches?

How to deal with car scratches

The first one is sandpaper sanding to repair. In fact, sanding with sandpaper can also remove slight scratches on the car. You only need to prepare a piece of sandpaper. First, clean and dry the scratched area of the car, and then dip the sandpaper in water and gently rub the scratched area.

If the degree of scratch is relatively light, that is, you can clearly see the scratches on the paint or the traces left by the object rubbing on the paint, and you can use a make-up pen to treat the scratches. But the premise is that you need to buy a coloring pen of the same color. The area of primer peeling and scratches is slightly larger. This kind of paint can be used for emergency relief.

How to deal with car scratches? First of all, remove the plaster wax film, oil film and other foreign objects on the surface of the paint. The method is to use wax removal detergent to clean the scratched part and then dry it.

How to deal with car scratches 3 Car scratch handling skills The paint damage part of slight scratches is on the surface of the topcoat, which can be completely repaired by waxing. Treat it with a mixture. The wiping method is to wipe in a straight line, and then apply wax. You can use coarse wax first, and then apply fine wax.

What should I do if the car body is scratched? How to judge the severity of car scratches? In fact, it is relatively simple to judge, mainly as follows: Have you seen the metal of the car body? If the scratch does not reveal the metal, this is a slight abrasion.

What should I do if the car body is scratched?

For light scratches, you only need to prepare a tube of toothpaste. Toothpaste has a very obvious effect on shallow scratches that do not damage the car primer.Especially when scraping with other vehicles, most of the residual paint left by other vehicles, or the traces left by some adhesive products such as self-adhesive tape, can be wiped dry.

Teak you tips on how to remove common body scratches. Observe carefully. You need to consider the problem of light, and it is best to observe the body from multiple angles. If you find scars on the car body, you can touch them with your fingertips or nails to check them. If it is just a small scratch, or the paint is peeling off, but the iron plate has not been damaged, you can completely repair it by yourself.

Some small ways to remove scratches by yourself. Toothpaste removal method I believe that every family has toothpaste, so this is also the most convenient. Apply the toothpaste to the small scratch and wipe it repeatedly with a gentle wet towel, so that the small scratches will also be removed. Friends with slight scratches on the paint can try it.

You should know tips on how to remove common body scratches

Slight scratches can be repaired with scratch wax, and the scratches can be ground with waxed sponge, which must be rubbed in one direction. Finally, use brightening wax, so that the car paint will be brighter after waxing. There is also the use of toothpaste to repair, which is an unprofessional operation, but it saves money. Toothpaste is applied and scratched, and a soft cloth is applied counterclockwise to reduce scratches.

Hair scratches: When driving at high speed, even soot and sand in the air may cause fine hair scratches on the surface of the car paint. Such hair scratches can be easily removed with wax with fine-cut abrasive, such as mirror polishing wax. Because the abrasive in it is fine to the nanometer level, it will not damage the original protective layer of the car paint.

Car owners will have such a small trouble, that is, there will be some scratches on the car body. Some of these scratches are due to their own factors, and some are due to comprehensive factors such as pebbles. Scratches affect the beauty of the car. Today, I will share with you how to easily solve the scratches on the car. Skills, I hope it will be helpful to you and solve your troubles.

For small scratches, such as the paint surface being cut into hair, just use car wax to hit some. You should choose high-quality car wax, wipe the place to be cleaned in advance, so that there is no dust, and you can wax it after drying.

Teak you tips on how to remove common body scratches. Observe carefully. You need to consider the problem of light, and it is best to observe the body from multiple angles.If you find scars on the car body, you can touch them with your fingertips or nails to check them. If it is just a small scratch, or the paint is peeling off, but the iron plate has not been damaged, you can completely repair it by yourself.

How to deal with car scratches?

1. If it is a small scratch, it can only be found by careful observation. You can use ice coke, pour it on a rag, and wipe it several times. You can also choose cheaper wind oil essence or toothpaste, apply it on a cloth, and repeatedly rub and scrub scratches, which can also be removed.

2. Choose the paint brush that is closest to the color of the vehicle. The owner who uses the paint brush for the first time will not be able to handle it ideally, and there will be a little protrusion and unss. After the car paint is completely dry, it can be sanded with the thinnest water sandpaper and fine sand wax, which can achieve a more ideal effect.

3. (2) Polish the scratched parts of the middle coating and surface paint to make it smooth and shiny; (3) Scratches are also related to cars. Most users and friends have encountered solutions for car scratches. The following is a brief introduction to how to patiently deal with car scratches. I hope it will be helpful to them.

4. The second tip for repairing the whole row of car waxing is to solve the scratches on the car is to use body wax to repair the whole row of waxing. If it is just a very light scratch surface paint, you can use the whole row of car waxing to repair it. The wiping method is straight wiping.

5. Surface treatment (1) Remove the surface coating, rust and welding slag with a shovel, steel wire brush, etc., sand the large part of the weld with a grinding wheel, and sand with No. 5-5 sandpaper to remove rust and debris on the bottom surface.(2) Clean the scratches with solvent and dry them. ( 3) Apply a thin layer of primer.