The problem is caused by the oxidation of the memory stick or the gold finger of the graphics card or the poor contact of the slot, which leads to the inability to turn on the computer.
Restart the computer: Try to simply restart the computer. Sometimes, the system may encounter temporary problems, which can be solved by restarting.Check the hardware connection: make sure that all hardware devices (such as keyboards, mice, monitors, etc.) are connected correctly. Sometimes, incorrect hardware connections may cause the computer to fail to start.
It can't be turned on. There are too many reasons. Memory, hard disk, motherboard and other hardware are all possible. The system boot damage will also be the same. You can troubleshoot it yourself. It's not all about finding someone to check for you. As long as the hardware is not broken, the system will be reinstalled at worst.
If you can enter the safe mode smoothly, you can solve the reason why you can't enter the desktop by checking and fixing the problem. Restore/repair the system: If the above method is not effective, you can try to use the recovery function pre-installed on the computer (such as restoring partition or restoring CD).
Suspect that the power supply is faulty, replace the original power supply with a good power supply, and then turn on the power test. The display appears a power-on screen, confirming that it is a power failure.After replacing an ATX power supply, install the operating system and use the test software to copy the machine for testing. Everything is normal and troubleshooting.
1. If the method cannot solve it, we can enter the safe mode to restore the system.
2. Then run the anti-virus software. If there is a virus, it may be caused by the virus. Restart the computer after the antivirus. If it is still abnormal, you need to reinstall the operating system.
3. In this case, the system upgrade file may be damaged and the system upgrade failed. You can start up and press f9 or f10 to enter the recovery mode to restore to before the upgrade, or restore to the factory settings.
4. The computer model is different. After entering, there are 2 kinds of recovery modes. One is to associate your own, which is very simple. Just choose to reset.
5. Solution Press f2 to enter bios when booting, and then enter the boot menu and set your hard disk as the first boot item. In addition, this situation is a hardware problem. You can turn on the computer host after cleaning the dust.
6. The laptop can't enter the system when it is turned on. You can try to eliminate viruses and Trojan horses in the following ways. You can use anti-virus software to check the computer's anti-virus! Check the temperature of the CPU and graphics card. If the temperature of the CPU and graphics card is too high, it often causes a protective automatic restart. Dust the fan, oil or replace the new fan.
CD-ROM installation of reinstalling the system: This is what many friends often do when they can't enter the computer. Of course, the premise is that you must have an optical drive and an installation CD-ROM.
Then run the anti-virus software. If there is a virus, it may be caused by a virus. After the antivirus, restart the computer. If it is not normal, you need to reinstall the operating system.
It is recommended to press F8 to enter the safe mode to see if you can enter the safe mode. If you can enter the safe mode, it is recommended to uninstall the previously installed software or update, check the virus, update the driver, and turn off the unused boot item test. If you can't enter the safe mode to restore the default settings of bios, it is recommended to enter the bios to restore the default settings test.
Global trade intelligence whitepapers-APP, download it now, new users will receive a novice gift pack.
The problem is caused by the oxidation of the memory stick or the gold finger of the graphics card or the poor contact of the slot, which leads to the inability to turn on the computer.
Restart the computer: Try to simply restart the computer. Sometimes, the system may encounter temporary problems, which can be solved by restarting.Check the hardware connection: make sure that all hardware devices (such as keyboards, mice, monitors, etc.) are connected correctly. Sometimes, incorrect hardware connections may cause the computer to fail to start.
It can't be turned on. There are too many reasons. Memory, hard disk, motherboard and other hardware are all possible. The system boot damage will also be the same. You can troubleshoot it yourself. It's not all about finding someone to check for you. As long as the hardware is not broken, the system will be reinstalled at worst.
If you can enter the safe mode smoothly, you can solve the reason why you can't enter the desktop by checking and fixing the problem. Restore/repair the system: If the above method is not effective, you can try to use the recovery function pre-installed on the computer (such as restoring partition or restoring CD).
Suspect that the power supply is faulty, replace the original power supply with a good power supply, and then turn on the power test. The display appears a power-on screen, confirming that it is a power failure.After replacing an ATX power supply, install the operating system and use the test software to copy the machine for testing. Everything is normal and troubleshooting.
1. If the method cannot solve it, we can enter the safe mode to restore the system.
2. Then run the anti-virus software. If there is a virus, it may be caused by the virus. Restart the computer after the antivirus. If it is still abnormal, you need to reinstall the operating system.
3. In this case, the system upgrade file may be damaged and the system upgrade failed. You can start up and press f9 or f10 to enter the recovery mode to restore to before the upgrade, or restore to the factory settings.
4. The computer model is different. After entering, there are 2 kinds of recovery modes. One is to associate your own, which is very simple. Just choose to reset.
5. Solution Press f2 to enter bios when booting, and then enter the boot menu and set your hard disk as the first boot item. In addition, this situation is a hardware problem. You can turn on the computer host after cleaning the dust.
6. The laptop can't enter the system when it is turned on. You can try to eliminate viruses and Trojan horses in the following ways. You can use anti-virus software to check the computer's anti-virus! Check the temperature of the CPU and graphics card. If the temperature of the CPU and graphics card is too high, it often causes a protective automatic restart. Dust the fan, oil or replace the new fan.
CD-ROM installation of reinstalling the system: This is what many friends often do when they can't enter the computer. Of course, the premise is that you must have an optical drive and an installation CD-ROM.
Then run the anti-virus software. If there is a virus, it may be caused by a virus. After the antivirus, restart the computer. If it is not normal, you need to reinstall the operating system.
It is recommended to press F8 to enter the safe mode to see if you can enter the safe mode. If you can enter the safe mode, it is recommended to uninstall the previously installed software or update, check the virus, update the driver, and turn off the unused boot item test. If you can't enter the safe mode to restore the default settings of bios, it is recommended to enter the bios to restore the default settings test.
Drilling equipment HS code mapping
author: 2024-12-24 00:15Chemical HS code alerts in EU markets
author: 2024-12-24 00:14Sourcing intelligence platforms
author: 2024-12-24 00:12HS code-driven trade finance optimization
author: 2024-12-23 23:57HS code guides for Middle East exporters
author: 2024-12-23 22:20Sourcing intelligence platforms
author: 2024-12-23 23:11How to improve trade compliance
author: 2024-12-23 23:08Comparing duty rates across markets
author: 2024-12-23 22:41Trade data-driven policy analysis
author: 2024-12-23 22:38154.55MB
Check873.85MB
Check425.92MB
Check977.95MB
Check214.13MB
Check195.36MB
Check912.92MB
Check443.34MB
Check441.51MB
Check986.18MB
Check723.11MB
Check193.87MB
Check667.75MB
Check196.54MB
Check572.53MB
Check627.33MB
Check495.14MB
Check994.29MB
Check396.36MB
Check881.58MB
Check748.93MB
Check445.71MB
Check422.94MB
Check277.32MB
Check265.47MB
Check962.78MB
Check749.66MB
Check872.22MB
Check295.49MB
Check469.68MB
Check289.53MB
Check913.32MB
Check268.82MB
Check948.99MB
Check721.52MB
Check557.74MB
CheckScan to install
Global trade intelligence whitepapers to discover more
Netizen comments More
2109 Global supply chain risk assessment
2024-12-24 00:06 recommend
194 WTO harmonization and HS codes
2024-12-23 23:06 recommend
297 Advanced HS code product classification
2024-12-23 22:41 recommend
356 HS code application in re-export scenarios
2024-12-23 22:21 recommend
225 End-to-end global logistics analytics
2024-12-23 22:10 recommend