1. The general principle is that all kinds of lightning protection buildings should take measures to prevent direct lightning strikes and lightning waves from invading people. Buildings equipped with lightning protection devices shall adopt isopotential connection when the lightning protection device cannot be isolated from other facilities and personnel in the building.
2. Especially in bad thunderstorms, ensuring the normal operation of the equipment of the fire center and not receiving the impact of some secondary disasters such as surges can life be guaranteed.
3. The large current shock caused the motherboard to burn out. Your situation has been reported by some customers.The grounding and lightning protection are not very good. A surge protector can be installed, which can play a protective role.
4. Fire broadcasting system lightning protection design: Fire broadcasting system, as one of the most important systems in recent days, its operation directly affects the safety of people's lives and property. Therefore, we have the obligation to strengthen the design and installation of its lightning protection facilities to ensure that they can be safe during the thunderstorm season. Run regularly.
5. The lightning rod cannot be connected to the water tank and water pipe. The top and bottom of the metal objects and metal pipes laid vertically in the lightning protection building should be connected to the lightning protection device. Pay attention to protect the non-metallic pipes that emit flammable and explosive gases on the roof, and include them in the protection scope of the flasher.
1. The lightning protection system is mainly composed of lightning arrester (lightning rod, lightning protection belt, lightning protection line and lightning protection net), lead line and grounding device. The lightning resistance level of a building refers to the current value (unit Ka) when the lightning protection system of the building is subjected to the impact of lightning current without damage.
2. In addition, the grounding to prevent the harm of lightning is called lightning protection grounding; the grounding of electrical equipment, etc. to prevent the possible accumulation of static charge is called anti-static grounding; the grounding to achieve the effect of shielding is called shielding grounding or isolated grounding.
3. The lightning protection grounding system of the internal and external lightning protection grounding device building shall be composed of internal lightning protection grounding device and external lightning protection grounding device. The basis for the utilization of natural groundingThe horizontal rebar of the bottom plate is connected to form a grounding net, which is connected to the steel bars around the groove edge to form a closed loop, forming a natural grounding body.
4. General civil buildings such as residences and office buildings with an estimated number of lightning strikes greater than 0.3 times/a. ( 3) Third-level lightning protection 1) Buildings and provincial archives protected by provincial key cultural relics.
5. First-level lightning protection: When the building itself is equipped with a lightning protection system (such as lightning rod, lead line, ground network and external shielding), according to the relevant theories of IEC and VDE, lightning arrester (box) needs to be used at the 380/230V low-voltage distribution circuit inside the building. To establish potential connections such as lightning protection on the power line.
6. Characteristics of lightning: the lightning current discharge current is large, and the amplitude is as high as tens to hundreds of thousands of ampetes;The discharge time is extremely short, only about 50~100μs; the wavehead steepness is high, up to 50ka/s, which is a high-frequency shock wave. The voltage generated by lightning induction can be as high as 300~500kv.
The lightning protection work of communication base station is a comprehensive and highly systematic lightning protection project. The lightning protection design of communication base station system is mainly It is a comprehensive consideration from the aspects of the constituent characteristics of the base station, the geographical environment, the engineering interface of the system equipment, etc. The main components of the communication base station are power supply facilities, communication signal transmission and base station system equipment.
The maintenance experience of several years tells us that it must be based onThe actual situation of each base station is to design the lightning protection grounding system of the mobile communication base station, and implement the targeted lightning protection of the base station.
This lightning protection design scheme has a general guiding role, and it should be specially designed for special occasions according to the specific situation. Lightning protection design Anti-direct lightning design According to the characteristics of the location of the paging communication base station, the new paging communication base station should be strictly in accordance with the requirements of the second category of building protection in the Building Lightning Protection Design Specification GB50057-94.
1. The principle refers to preventing electromagnetic pulses of direct lightning or lightning from causing the building itself or its internal equipment by forming an integrated system of interception, dredging and finally discharge into the ground. Protection technology for damage.
2. First, look at the description, then look at the position of the line installation marked in the figure, and then check whether there is a lead line at the position of each column or shear wall.
3. The lightning protection grounding principle of the tower crane is to use grounding conductors to connect the lightning protection equipment to the earth to form a stable and reliable conductive channel, so that the lightning current can flow into the ground as soon as possible, so as to reduce lightning damage and protect the tower crane and construction site.
Because the economic conditions of each industry and even each unit are different and the security levels of monitoring needs are different, the integration of lightning protection equipment varies depending on the situation. Usually, the following lightning protection factors need to be considered: lightning protection of the transmission line and the transmission line of the transmission system are mainly the power line of the transmission signal line. .
The transmission cable of the monitoring system should be used to prevent the intrusion of lightning waves, and cables with shielding effect should be adopted, or the whole process should be laid with metal tubes. The shielding layer should be electrically connected, and the first and tail ends should be grounded or connected to equal potentials respectively. The part of the (LPZOA) area should be buried in the ground.
In thunderstorm weather, how can security monitoring equipment take lightning protection measures? Weak electric bright son shares 3 points.
Lightning protection of front-end equipment: There are two distribution methods of front-end equipment: outdoor and indoor. The indoor distribution generally will not be directly struck by lightning, but it is necessary to consider preventing lightning and overvoltage from infringing the equipment, while outdoor equipment also needs to prevent direct lightning strikes.
First, the power supply is lightning protection. Install an anti-surge protector on the power supply line to guide the lightning surge current through the ground wire.Entering the ground network, the power supply lightning protection is divided into first-level lightning protection, second-level lightning protection, and third-level lightning protection, and absorbs lightning surges step by step.
If it is difficult for the cable to penetrate the metal pipe in the whole process, it can be introduced through the metal pipe before the cable enters the terminal and front-end equipment, but the buried length shall not be less than 15 meters. At the entry end, the metal outer skin and steel pipe of the cable are connected to the lightning protection grounding device.
Industrial spare parts HS code mapping-APP, download it now, new users will receive a novice gift pack.
1. The general principle is that all kinds of lightning protection buildings should take measures to prevent direct lightning strikes and lightning waves from invading people. Buildings equipped with lightning protection devices shall adopt isopotential connection when the lightning protection device cannot be isolated from other facilities and personnel in the building.
2. Especially in bad thunderstorms, ensuring the normal operation of the equipment of the fire center and not receiving the impact of some secondary disasters such as surges can life be guaranteed.
3. The large current shock caused the motherboard to burn out. Your situation has been reported by some customers.The grounding and lightning protection are not very good. A surge protector can be installed, which can play a protective role.
4. Fire broadcasting system lightning protection design: Fire broadcasting system, as one of the most important systems in recent days, its operation directly affects the safety of people's lives and property. Therefore, we have the obligation to strengthen the design and installation of its lightning protection facilities to ensure that they can be safe during the thunderstorm season. Run regularly.
5. The lightning rod cannot be connected to the water tank and water pipe. The top and bottom of the metal objects and metal pipes laid vertically in the lightning protection building should be connected to the lightning protection device. Pay attention to protect the non-metallic pipes that emit flammable and explosive gases on the roof, and include them in the protection scope of the flasher.
1. The lightning protection system is mainly composed of lightning arrester (lightning rod, lightning protection belt, lightning protection line and lightning protection net), lead line and grounding device. The lightning resistance level of a building refers to the current value (unit Ka) when the lightning protection system of the building is subjected to the impact of lightning current without damage.
2. In addition, the grounding to prevent the harm of lightning is called lightning protection grounding; the grounding of electrical equipment, etc. to prevent the possible accumulation of static charge is called anti-static grounding; the grounding to achieve the effect of shielding is called shielding grounding or isolated grounding.
3. The lightning protection grounding system of the internal and external lightning protection grounding device building shall be composed of internal lightning protection grounding device and external lightning protection grounding device. The basis for the utilization of natural groundingThe horizontal rebar of the bottom plate is connected to form a grounding net, which is connected to the steel bars around the groove edge to form a closed loop, forming a natural grounding body.
4. General civil buildings such as residences and office buildings with an estimated number of lightning strikes greater than 0.3 times/a. ( 3) Third-level lightning protection 1) Buildings and provincial archives protected by provincial key cultural relics.
5. First-level lightning protection: When the building itself is equipped with a lightning protection system (such as lightning rod, lead line, ground network and external shielding), according to the relevant theories of IEC and VDE, lightning arrester (box) needs to be used at the 380/230V low-voltage distribution circuit inside the building. To establish potential connections such as lightning protection on the power line.
6. Characteristics of lightning: the lightning current discharge current is large, and the amplitude is as high as tens to hundreds of thousands of ampetes;The discharge time is extremely short, only about 50~100μs; the wavehead steepness is high, up to 50ka/s, which is a high-frequency shock wave. The voltage generated by lightning induction can be as high as 300~500kv.
The lightning protection work of communication base station is a comprehensive and highly systematic lightning protection project. The lightning protection design of communication base station system is mainly It is a comprehensive consideration from the aspects of the constituent characteristics of the base station, the geographical environment, the engineering interface of the system equipment, etc. The main components of the communication base station are power supply facilities, communication signal transmission and base station system equipment.
The maintenance experience of several years tells us that it must be based onThe actual situation of each base station is to design the lightning protection grounding system of the mobile communication base station, and implement the targeted lightning protection of the base station.
This lightning protection design scheme has a general guiding role, and it should be specially designed for special occasions according to the specific situation. Lightning protection design Anti-direct lightning design According to the characteristics of the location of the paging communication base station, the new paging communication base station should be strictly in accordance with the requirements of the second category of building protection in the Building Lightning Protection Design Specification GB50057-94.
1. The principle refers to preventing electromagnetic pulses of direct lightning or lightning from causing the building itself or its internal equipment by forming an integrated system of interception, dredging and finally discharge into the ground. Protection technology for damage.
2. First, look at the description, then look at the position of the line installation marked in the figure, and then check whether there is a lead line at the position of each column or shear wall.
3. The lightning protection grounding principle of the tower crane is to use grounding conductors to connect the lightning protection equipment to the earth to form a stable and reliable conductive channel, so that the lightning current can flow into the ground as soon as possible, so as to reduce lightning damage and protect the tower crane and construction site.
Because the economic conditions of each industry and even each unit are different and the security levels of monitoring needs are different, the integration of lightning protection equipment varies depending on the situation. Usually, the following lightning protection factors need to be considered: lightning protection of the transmission line and the transmission line of the transmission system are mainly the power line of the transmission signal line. .
The transmission cable of the monitoring system should be used to prevent the intrusion of lightning waves, and cables with shielding effect should be adopted, or the whole process should be laid with metal tubes. The shielding layer should be electrically connected, and the first and tail ends should be grounded or connected to equal potentials respectively. The part of the (LPZOA) area should be buried in the ground.
In thunderstorm weather, how can security monitoring equipment take lightning protection measures? Weak electric bright son shares 3 points.
Lightning protection of front-end equipment: There are two distribution methods of front-end equipment: outdoor and indoor. The indoor distribution generally will not be directly struck by lightning, but it is necessary to consider preventing lightning and overvoltage from infringing the equipment, while outdoor equipment also needs to prevent direct lightning strikes.
First, the power supply is lightning protection. Install an anti-surge protector on the power supply line to guide the lightning surge current through the ground wire.Entering the ground network, the power supply lightning protection is divided into first-level lightning protection, second-level lightning protection, and third-level lightning protection, and absorbs lightning surges step by step.
If it is difficult for the cable to penetrate the metal pipe in the whole process, it can be introduced through the metal pipe before the cable enters the terminal and front-end equipment, but the buried length shall not be less than 15 meters. At the entry end, the metal outer skin and steel pipe of the cable are connected to the lightning protection grounding device.
Tobacco products HS code verification
author: 2024-12-23 23:59Latin America trade data insights
author: 2024-12-23 23:36HS code mapping to logistics KPIs
author: 2024-12-23 23:13Import export cost optimization
author: 2024-12-23 22:29Industrial adhesives HS code mapping
author: 2024-12-23 22:24Canada shipment tracking services
author: 2024-12-24 00:11Global trade compliance dashboards
author: 2024-12-23 23:52How to calculate landed costs accurately
author: 2024-12-23 23:27Export quota monitoring software
author: 2024-12-23 22:15HS code referencing for port authorities
author: 2024-12-23 21:58364.84MB
Check986.79MB
Check949.38MB
Check829.85MB
Check257.94MB
Check946.15MB
Check789.97MB
Check862.87MB
Check757.25MB
Check261.87MB
Check918.56MB
Check635.32MB
Check822.71MB
Check391.41MB
Check485.87MB
Check286.69MB
Check828.93MB
Check675.13MB
Check516.41MB
Check218.31MB
Check821.57MB
Check229.87MB
Check779.78MB
Check999.79MB
Check257.92MB
Check321.98MB
Check322.28MB
Check159.88MB
Check697.91MB
Check243.69MB
Check629.11MB
Check937.16MB
Check478.99MB
Check383.46MB
Check356.36MB
Check785.72MB
CheckScan to install
Industrial spare parts HS code mapping to discover more
Netizen comments More
2788 Global trade data-driven forecasting
2024-12-24 00:00 recommend
343 How to analyze competitor shipping routes
2024-12-23 23:45 recommend
1142 Trade data for enterprise resource planning
2024-12-23 23:29 recommend
742 HS code monitoring in European supply chains
2024-12-23 23:08 recommend
1765 Shipping lane performance metrics
2024-12-23 21:47 recommend