1. Insufficient fuel supply. The return oil control valve in the pump cover oil channel is not closed tightly. At this time, the engine is not working stable. When it is serious, it will turn off with a slight load, and it is difficult to start. 2 There is an oil leak in the oil line, the air entering or the fuel filter is blocked, the oil is not smooth, and the engine is weak.
2. There are many reasons. The routine is the air filter, the nozzle, whether the oil has not been changed, and whether the battery has enough power. These are the most basic. Then it is to check the oil in the wave tank and whether the oil line is unobstructed. The most direct way is to add additives without disassembly. This head will not do much, and it is also relatively old.
3. Hello, this is the lack of power of the engine.The following points need to be checked: 1 The oil pressure of gasoline, the lack of oil pressure is generally caused by the false connection of the gasoline pump and its lines. 2 Check the spark plug and ignition coil. If the ignition energy is insufficient, the power will be insufficient.
1. The brand is a Mitsubishi engine. The 8L version of Heyue RS is equipped with Mitsubishi's 4G93D engine. This engine is Mitsubishi's old engine, which is widely used in many independent brand models.
2. Heyue RS5L uses HFC4GB3C engine, and Heyue RS8L uses 4G93D engine, both of which are Mitsubishi's technology, which are quite mature. The poster can search for a detailed understanding of these two engine models on Baidu.
3. Hello, this car friend, Jianghuai Heyue RS uses the engine produced by "Dong'an Mitsubishi", which is based on the introduction of Mitsubishi technology.
4. Equipped with the first-generation Mitsubishi engine. It is equipped with a 5-liter naturally aspirated engine and an 8-liter naturally aspirated engine. Among them, the maximum horsepower of the 5-liter version of Heyue is 113 horsepower, the maximum power is 83kw, and the maximum torque is 146N*m.
1. As for whether the idling motors of the 4G93D and 4G93 engines are the same, it depends on the specific model and year of production. There may be some differences between the two engines, so it is recommended to consult a car manufacturer or a professional mechanic for accurate information.
2. The idle speed of the engine is generally 700 to 900 rpm. Each model is different, and the idle speed is different. If it is an electronic throttle valve, the idle speed cannot be adjusted. Pull the wire throttle valve can loosen the adjustment screw at the throttle valve spring, as long as the engine does not turn off after the refueling door. Fire is fine.
3. Jingyi uses a 4G93D4 all-aluminum alloy engine with double overhead camshafts and 4 valves per cylinder. The maximum power of 103kW/6500rpm and the peak torque of 168N.m/5000rpm can be provided in technical data.
HS code-based customs dispute resolution-APP, download it now, new users will receive a novice gift pack.
1. Insufficient fuel supply. The return oil control valve in the pump cover oil channel is not closed tightly. At this time, the engine is not working stable. When it is serious, it will turn off with a slight load, and it is difficult to start. 2 There is an oil leak in the oil line, the air entering or the fuel filter is blocked, the oil is not smooth, and the engine is weak.
2. There are many reasons. The routine is the air filter, the nozzle, whether the oil has not been changed, and whether the battery has enough power. These are the most basic. Then it is to check the oil in the wave tank and whether the oil line is unobstructed. The most direct way is to add additives without disassembly. This head will not do much, and it is also relatively old.
3. Hello, this is the lack of power of the engine.The following points need to be checked: 1 The oil pressure of gasoline, the lack of oil pressure is generally caused by the false connection of the gasoline pump and its lines. 2 Check the spark plug and ignition coil. If the ignition energy is insufficient, the power will be insufficient.
1. The brand is a Mitsubishi engine. The 8L version of Heyue RS is equipped with Mitsubishi's 4G93D engine. This engine is Mitsubishi's old engine, which is widely used in many independent brand models.
2. Heyue RS5L uses HFC4GB3C engine, and Heyue RS8L uses 4G93D engine, both of which are Mitsubishi's technology, which are quite mature. The poster can search for a detailed understanding of these two engine models on Baidu.
3. Hello, this car friend, Jianghuai Heyue RS uses the engine produced by "Dong'an Mitsubishi", which is based on the introduction of Mitsubishi technology.
4. Equipped with the first-generation Mitsubishi engine. It is equipped with a 5-liter naturally aspirated engine and an 8-liter naturally aspirated engine. Among them, the maximum horsepower of the 5-liter version of Heyue is 113 horsepower, the maximum power is 83kw, and the maximum torque is 146N*m.
1. As for whether the idling motors of the 4G93D and 4G93 engines are the same, it depends on the specific model and year of production. There may be some differences between the two engines, so it is recommended to consult a car manufacturer or a professional mechanic for accurate information.
2. The idle speed of the engine is generally 700 to 900 rpm. Each model is different, and the idle speed is different. If it is an electronic throttle valve, the idle speed cannot be adjusted. Pull the wire throttle valve can loosen the adjustment screw at the throttle valve spring, as long as the engine does not turn off after the refueling door. Fire is fine.
3. Jingyi uses a 4G93D4 all-aluminum alloy engine with double overhead camshafts and 4 valves per cylinder. The maximum power of 103kW/6500rpm and the peak torque of 168N.m/5000rpm can be provided in technical data.
Global trade metadata enrichment
author: 2024-12-24 02:49HS code application in re-export scenarios
author: 2024-12-24 01:59Trade data for industrial machinery
author: 2024-12-24 01:16How to leverage open-source trade data
author: 2024-12-24 01:15HS code-based container load planning
author: 2024-12-24 00:56Global trade data-driven asset utilization
author: 2024-12-24 02:43Sourcing intelligence from customs data
author: 2024-12-24 02:26Dynamic import export data modeling
author: 2024-12-24 00:18725.55MB
Check679.22MB
Check448.89MB
Check914.49MB
Check538.21MB
Check341.82MB
Check184.89MB
Check919.88MB
Check378.88MB
Check813.49MB
Check341.19MB
Check529.87MB
Check198.39MB
Check563.14MB
Check324.67MB
Check736.93MB
Check949.89MB
Check243.77MB
Check421.14MB
Check384.19MB
Check651.59MB
Check789.65MB
Check893.76MB
Check642.74MB
Check743.17MB
Check765.84MB
Check596.64MB
Check581.13MB
Check878.56MB
Check119.59MB
Check492.31MB
Check426.57MB
Check677.72MB
Check694.32MB
Check832.55MB
Check483.47MB
CheckScan to install
HS code-based customs dispute resolution to discover more
Netizen comments More
2244 Trade data-driven contract negotiations
2024-12-24 02:13 recommend
1940 Global trade resource libraries
2024-12-24 02:01 recommend
2013 Plastics raw materials HS code lookups
2024-12-24 01:39 recommend
2594 HS code-based trade route profitability
2024-12-24 00:58 recommend
1449 HS code-driven customs clearance SLAs
2024-12-24 00:34 recommend