How to measure supplier performance

What to do if a new energy vehicle catches fire?

1. If a new energy vehicle is on fire, you should use a fire extinguisher or call a fire truck directly to extinguish the fire.It is not allowed to extinguish the fire with water. New energy vehicles include pure electric vehicles and plug-in hybrid vehicles. Plug-in hybrid vehicles are different from ordinary hybrid vehicles. Plug-in hybrid cars can use an external power supply to charge the power battery.

2. Most of the fires of new energy vehicles are caused by overheating of the battery or problems with the circuit. When a new energy vehicle catches a fire, you need to use a fire extinguisher or directly call a fire truck to extinguish the fire. Water cannot be used to extinguish the fire. New energy vehicles include pure electric vehicles and plug-in hybrid vehicles.

3. When a new energy vehicle catches fire, you must use a fire extinguisher or immediately call a fire truck to put out the fire. If the fire has just started, you must turn off the power immediately when you can turn it off, and put the car key into the signal shielding bag and place the bag ten meters away from the car.

What causes the car on fire

1. The reason for the car to catch fire The fuel leakage of the car engine Leak. This engine is composed of various parts. If it is not maintained for a long time, it will lead to friction loss of each part, so that the oil seal ring cannot reach the standard of complete sealing. If used for a long time, the oil will be scattered on the auxiliary pipeline of the engine, causing corrosion.

2. Once the line is exposed and exposed to oil, it will release a large amount of heat, causing a fire. The car was hit strongly, causing the flammable materials in the car to leak and contact with the line or fire source. When the engine is running, the temperature of the ignition coil will rise sharply. If the leak comes into contact with sludge and other combustion-fuelling materials, it will cause a fire.

3. The reasons for the spontaneous combustion of the car include short circuit caused by the aging of the vehicle, the random release of debris in the car, the non-standard parking area, etc.

4. There are many causes of car fires, the most common of which is circuit failure. Due to the complexity of automotive electronic equipment, aging wires or after the vehicle is placed for a long time, poor circuit contact or short circuit may cause fires. In addition to circuit problems, mechanical failure is also another important cause of car fires.

5. When we usually watch the news, we have seen the spontaneous combustion of vehicles. The scene was really miserable. Except for the shelves, the vehicles were basically burned out. If we want to prevent spontaneous combustion of vehicles, we need to find out the cause of spontaneous combustion of vehicles.

6. The fire caused by car leakage and the damage of spark plugs are directly related to the principle.

Will the car explode when it catches fire

The longer the time, the greater the possibility of an explosion, but generally it will not explode. The reason for the explosion of the car is that the fuel tank of the car will not explode, but there must be a closed space for the explosion. About 7 minutes later, the entire chassis of the car will begin to burn completely, and the tires will not be able to withstand the high temperature and begin to burst, resulting in an explosion.

But this is not the case in real daily life. Spontane-combustion cars will not explode.Spontaneous combustion is mostly caused by circuit or oil circuit problems, and some spontaneous combustion is affected by the fire of high-temperature components in the cabin. When early turbocharging technology was first applied to automobile engines, cars were prone to spontaneous combustion.

If there is a fire near the fuel tank, it will explode. The fuel tank of a car will not explode. There must be a closed space for explosion. About 7 minutes later. The whole chassis of the car began to burn. The tire couldn't stand such a high temperature and began to burst.

What to do when a new energy vehicle catches fire

Most of the fire in new energy vehicles is caused by overheating of the battery or problems with the circuit. When a new energy vehicle catches a fire, you need to use a fire extinguisher or directly call a fire truck to extinguish the fire. Water cannot be used to extinguish the fire. New energy vehicles include pure electric vehicles and plug-in hybrid vehicles.

If a new energy vehicle is on fire, you should use a fire extinguisher or directly call a fire truck to extinguish the fire. It is not allowed to extinguish the fire with water. New energy vehicles include pure electric vehicles and plug-in hybrid vehicles. Plug-in hybrid vehicles are different from ordinary hybrid vehicles. Plug-in hybrid cars can use an external power supply to charge the power battery.

When a new energy vehicle catches fire, a fire extinguisher must be used or a fire truck must be called to extinguish the fire immediately. If the fire has just started, you must turn off the power immediately when you can turn it off, and put the car key into the signal shielding bag and place the bag ten meters away from the car.

These six reasons may cause spontaneous combustion of cars

The main causes of spontaneous combustion of cars: leakage, grounding, oil leakage, electrical failure and short circuit, and excessive contact resistance.

Reason 1: The circuit is aging. After a period of use, the wires of the car will age, and the external insulation layer will fall off. Circuit failure or poor wire contact will cause a short circuit, thus causing spontaneous combustion.

The hidden danger of poor quality modification causes spontaneous combustion of the car. Without any signs, most of the sudden spontaneous combustion accidents of cars are caused by line failures. In spontaneous combustion accidents caused by line failures, most of the reasons are the arbitrary change of lines.

After the car wades in the water, it is likely to cause oxidation of the circuit connector, and the uneven power supply will lead to local heating and spontaneous combustion. The car has been modified; during the modification process, the circuit and oil route of the car may change. If the technical level of the modifier is not high, it will definitely leave safety hazards.

List of contents of this article:

• 1,How to measure supplier performance What to do if a new energy vehicle catches fire?
• 2、3, Will the car explode if it catch fire
• 4、
• Step 7: Complete registration
• Once you have completed all necessary steps and agreed to the terms of How to measure supplier performance, congratulations! You have successfully registered a How to measure supplier performance account. Now you can enjoy a wealth of sporting events, thrilling gaming experiences and other excitement from How to measure supplier performance