How to analyze import export documentation

List of contents of this article:

• 1,How to analyze import export documentation How to fix the broken car starter?
• 2, Which brand of car ignition starter is good?
• 3, What is the performance of a broken car starter
• 4, Working principle of commonly used motors for automobiles, introduction of start-up motors for automobiles
• 5, Where is the car starter?
• 6, What's the problem if the car ignition starter doesn't respond

How to fix the broken car starter?

1. To repair a broken starter, you can follow the following methods: according to the actual maintenance experience, judge whether the starter is good or bad, generally a battery failure or a starter failure. The engine can be started by short-circuiting the two terminals of the electromagnetic switch of the starter. If the starter is running, it is a failure of the starter relay or fuse.

2. How to repair a broken car starter? If the following symptoms occur, the starter may be damaged: turn on the ignition switch to start the gear, and you can hear the impact sound of the starter driving gear and flywheel teeth. After the ignition switch is turned on, the starter does not rotate, and the electromagnetic switch makes a "click, click" sound.

3. Ensure sufficient electricity. Then remove the starter from the engine for disassembly and inspection. The inspection results show that there are obvious burn marks on the surface of the changer. Poor contact between the brush and the inverter leads to a failure that does not rotate when starting. Repair the surface of the inverter with a lathe, and carry out the loading experiment after the starter is repaired. The phenomenon of the same phenomenon.

4. It can be repaired. After the start switch is turned on, the starter rotates at high speed and the crankshaft of the engine does not respond. This kind ofThe phenomenon indicates that the failure occurred in the transmission mechanism of the starter, which may be caused by the wear of the transmission gear or one-way clutch. The starter does not work properly, and the driving gear does not turn.

Which brand of car ignition starter is good?

1. Personally, I recommend you to choose the emergency start-up power supply of Angjia Automobile. This power supply is of good quality and high sales.

2. Expand all. I recommend the three brands of Ongjia, Carls and Bosch. Angjia brand not only has its own high-magnification cell factory, but also has brand promotion branches in the United States and Germany.

3. Michelin car emergency start-up power supply. Many times, we car owners may only know Michelin restaurants and Michelin tires, but in fact, Michelin also has its own brand of car emergency start-up power supply.

4. Car ignition starter is a commonly used accessory for vehicles. Common brands include BOSCH, DENSO, NGK, etc. Engine starters of different brands and models will affect the performance and driving experience of the vehicle, so it is very important to choose the right engine starter for your vehicle.

5. The best-reputed emergency start-up power supply is the Michelin brand.Michelin starter power supply is a high-efficiency starter specially designed for cars. It is suitable for 12V car models with 0 liters or less than 0 turbochargers. This car emergency start power supply has excellent performance and function, and can provide reliable power supply.

6. The good brands of Qiangqi power supply are: Xiaonengren Shenzhen Nianlun Electronic Technology Co., Ltd. was established on July 2, 2014. Shenzhen Nianlun Electronic Technology Co., Ltd. is located in Shenzhen, China. Nianlun Electronic Technology is an electronic high-tech company integrating research and development, production and sales in the fields of electronic products and automotive supplies.

What is the performance of the car starter broken

makes a strange sound and the engine starts slowly. LauncherThe gears and transmission components in the middle will make a clicking or rattling sound due to damage or wear. These sounds will be heard when the key is turned or the start button is pressed, indicating that there is a problem with the starter.

A common phenomenon of broken car starter: after turning on the starter switch, the starter rotates at high speed and the engine crankshaft does not respond. This phenomenon indicates that the fault occurs in the transmission mechanism of the starter, which may be caused by the wear of the transmission gear or one-way clutch. The starter does not work properly, and the driving gear does not turn.

When the starter of the car is broken, it will not be unable to start, difficult to start, unstable idle speed, easy to turn off, insufficient power, weak acceleration, increased fuel consumption and excessive emissions, mainly because the start-up system, fuel supply system, ignition system and control system are damaged by the starter. Up.

The phenomenon that occurs when the car starter fails: the battery is out of power or weak, so the starter cannot rotate or rotates slowly. The starter wire is loose or falls off, and the switch or adsorption switch fails. The brush is worn or the brush surface is not correct, and the spring is weak, resulting in poor contact with the rectifier.

Working principle of commonly used motors for automobiles, introduction of automobile start-up motors

There are three common engine start-up methods: manual start-up, gasoline engine start-up and electric start-up. The manual start-up method of pulling rope or hand cranking is simple but inconvenient, labor-intensive, and only meets the requirements of objective conditions for small-power engines, and is only used as a backup method for small cars; the start-up key of the gasoline engine is used for high-power diesel engines.

The working principle is based on the principle of electromagnetic induction. The current-carrying conductor moves under the action of force in the magnetic field. The energized coil rotates under force in the magnetic field, which drives the rotor of the starter to rotate, and the small gear on the rotor drives the engine flywheel to rotate. The start-up system converts the electrical energy stored in the battery into mechanical energy.

The car starter motor (electric motor) is the car starter. It converts the electrical energy of the battery into mechanical energy in the car and drives the engine flywheel to rotate to start the engine.

The starting motor is generally composed of a transmission mechanism, a control mechanism (electromagnetic switch) and a DC motor. The working principle of the starting motor is to convert the electrical energy of the battery into mechanical energy, so as to drive the flywheel on the engine to rotate, thus realizing the start-up of the engine.

The starter, also known as the motor, is powered by the DC motor, transmitted to the flywheel gear through the starting gear, and drives the flywheel and crankshaft to rotate to start the engine. 1 The power output structure is divided into two parts: the electric pivot and the transmission shaft.

The working principle of commonly used motors in automobiles. Its working principle is the transformation process of energy based on ampere's law that we have encountered in junior high school physics, that is, the function of energized conductors in the magnetic field. The motor includes the necessary armature, commutator, magnetic pole, brush, bearing, shell and other components.

Where is the car starter?

1. The car starter is behind the engine, that is, near the flywheel: as we all know, the start of the engine needs the support of external forces, and the car starter plays this role;Generally speaking, the starter uses three parts to realize the whole start-up process.

2. The bottom right of the steering wheel. The Lechi car starter is located at the bottom right of the steering wheel. It is a circular button with the words START/STOP written on it. If you carry a smart key, just press the button. If you carry a mechanical key, you need to insert the key into the key hole under the button and press the button again.

3. Close to the cab. According to the query autohome website, the starter of Lefeng 6 manual transmission is located behind the engine near the cab. The function of the car starter converts the electrical energy of the battery into mechanical energy and drives the engine flywheel to rotate to realize the start-up of the engine.

4. The motor of the old-fashioned Wuling Light is under the driver's seat. Liuzhou Wuling AutonomousWuling Zhiguang, a mini car with high technology and high quality, was developed and launched in 2003. The new 6360 microcar is safer to drive, beautiful and generous in appearance, economical and practical, and has a spacious interior space.

What is the problem if the car ignition starter does not respond

1. If the car ignition starter does not respond, it is necessary to check whether the battery is out of power, whether the line is short-circuited, and whether the igniter is damaged; replace the phase immediately Just turn off the parts. Most of the reasons for the damage of the igniter are the burnt of the igniter fuse, the damage of the ignition coil, the fault of the distributor, or the insufficient battery power, resulting in the inability to ignite the igniter.

2. The first to be confirmedYes, is there still power in the battery, because when the battery runs out of power, there will be no response to the ignition. If it is caused by this situation, the battery should be charged, and after the battery is charged, it can be ignited normally.

3. Lack of fuel. It may be because the vehicle lacks fuel, so the fuel needs to be checked before driving, and if the fuel is insufficient, it should be added in time. The battery is out of power. It may be that the battery of the vehicle is out of power, and the ignition system does not work properly, resulting in the failure of the car to start, and the battery needs to be charged in time. The anti-theft system is turned on.