Precision machining HS code checks

List of the catalog of this article:

• 1,Precision machining HS code checksThe right way to set the car on fire in winter
• 2, Car point What is the sign of fire
• 3, How to ignite the car correctly
• 4、Precision machining HS code checksextinguished within 3 minutes when the car spontaneously ignites' title='Safety knowledge: Run if the fire can't be extinguished within 3 minutes when the car spontaneously ignites'>Safety knowledge: Run if the fire can't be extinguished within 3 minutes when the car spontaneously ignites

The correct method of starting a car in winter

The correct operation method of starting a car in winter, open the key door, stand still for 30 seconds, step on the brake to start the engine, and the car will be preheated for about 5 to 10 minutes to start normally. On the road, I'm glad to help you. Please adopt it.

It is suggested that you can try to step on the accelerator while swing the key to ignite. This method is special for ignition.It is effective, but it should be noted that when the car is about to start, loosen the accelerator appropriately, because stepping on the accelerator is harmful to the car. If this method does not work, it may be related to some external factors of the car. Some old cars that take a long time.

The correct thing to do is to start it for the first time and it doesn't catch fire, and then start it for the second time after 20 seconds. After starting, don't be in a hurry to drive and increase the preheating time. Generally, the water temperature of the vehicle reaches 40 degrees, starting the most economical car 2 The car battery will generally discharge after parking at night. When it is used for a long time in winter There is static discharge in the car.

What is the sign of car ignition

1. Motor vehicle ignition sign refers to the four signs that appear when the vehicle starts. These four signs are: ignition switch, battery indicator light, fuel indicator light and engine fault indicator light.The following will introduce these four logos in detail. The first is the ignition switch. The ignition switch refers to the switch required when the vehicle starts.

2. The logo symbols of the car ignition device are as follows: - "LOCK" - "ACC" - "ON" - "START" The one-click start vehicle is only printed with the "START" symbol.

3. According to the relevant information of the query plus ignition sign, it is learned that the oil needle plus ignition sign on the car is LOCK" "ACC" "ON" "START", and the mark symbol of the car ignition device is printed with "LOCK", "ACC" "ON" and "START" on the ignition switch. Marking; vehicles with one-click start are only printed with the START mark.

4. In general, the ignition of the carThe switch has four positions, which are marked with the letters "LOCK", "ACC", "ON" and "START" respectively. The meaning of these four states is: "LOCK" The engine is turned off, and the steering wheel will be locked when rotated at a certain angle. Only in this position can the key be pulled out.

5. What does the start sign of the car mean? The start sign on the car is one-click start, also known as keyless ignition system.

6. Take Honda Fit as an example, the "+, -" icons on the dashboard in the car fault indicator light are the ignition warning light, indicating that there is a problem with the ignition plug.

How to ignite the car correctly

1. Check the engine oil. Before the car is ignited, first check the engine oil to ensure that the quality and quantity of the oil meet the requirements.The car engine oil must be kept between the lowest marking line and the highest marking line of the fuel tank, otherwise it will affect the normal operation of the engine and even get stuck.

2. The correct way to start a car is as follows: insert the ignition key and screw it to "start". When the vehicle starts, the instrument indicator light will light up briefly and then turn off, and the new car computer will enter the self-inspection state (about 6 seconds). If the fault light is still on after the end, you need to turn off the engine and troubleshoot before restarting the engine.

3. Insert the key in the Lock position and do not twist it. Wait for about 2 seconds. After that, you can directly stop at the ON position through the ACC position and wait for about 5 seconds.

4. When the car is igniting, you should step on the clutch, step on the brake, and step on the clutch to reduce the load on the engine.This is very important, because the clutch is the switch that cuts off the engine and gearbox. If you don't step on the clutch at this time, you will largely avoid the situation of stepping on the accelerator when you are on fire. If it is idle, you should step on the clutch when you are on fire.

5. The correct way to ignite a car is: step on the clutch deeply, turn the ignition key to the ON position, wait for 5 to 8 seconds, and then turn the key to the start position to start the engine; once the engine starts smoothly, you should immediately release the ignition key and let it automatically return to the ON position.

How to ignite the car

Insert the key in the Lock position, do not twist it first, wait for about 2 seconds, and then twist the key to stop in the ON position directly through the ACC position and wait for about 5 seconds.

Check whether the battery meets the requirements. If the battery is too low, it cannot be ignited normally. At this time, you need to use the battery charger to charge it. After the battery meets the normal requirements, it can be ignited.

The steps for car ignition are: step on the clutch and wait for 5 to 8 seconds when turning the ignition key to the ON position; then turn the key to the starting position to start the engine; release the ignition key immediately after the engine starts smoothly and let it automatically return to the ON position.

How to start the car? The correct ignition steps of the car (engine starting method)

Insert the key in the Lock position, do not twist it, wait for about 2 seconds, and then twist the key can be stopped directly in the ON position through the ACC position and wait for about 5 seconds.

The correct way to ignite the car is as follows: insert the ignition key and screw it to "start". When the vehicle starts, the instrument indicator light will light up briefly and then turn off, and the new car computer will enter the self-inspection state (about 6 seconds). If the fault light is still on after the end, you need to turn off the engine and troubleshoot before restarting the engine.

Before driving next time, check the gear and start the car correctly. Step 1 Insert the key and rotate to acc and wait for about 2 to 3 seconds, so that the main power supply relay contacts are firmly in contact. 2 Turn the key to on and wait for 6 to 10 seconds, and let the oil pump relay absorb 3. Turn the key to start until the engine is continuous. Just return to on after running.

The steps for ignition with the car key are as follows: First, insert the car key into the keyhole, and don't step on the brake pedal when inserting the key; after the key is inserted into the keyhole, we rotate clockwise, turn to the ACC position and stop, and the vehicle will slowly turn on the power.

How to start the car: When starting, turn the ignition key to the ON position, wait 5-8s, and then turn the key to the starting position to start the engine.

Safety knowledge: Run if the fire can't be extinguished within 3 minutes when the car spontaneously ignites

1. If the car catches a fire, whether to save or escape depends on the situation. Generally speaking, a fire in a private car within 3 minutes may extinguish itself. If it burns for more than 3 minutes, it is too dangerous. It is better to abandon the car to escape.

2. At this time, you can pull open the locking wrench, let the hood leak a seam, and then spray the fire extinguishing agent into it until there is no smoke to stop. Only then can you open the hood and clean up.

3. Treatment of spontaneous combustion of the car: stop immediately, pull the handbrake, and turn off the power. Then quickly leave the burning car, remember to take out the fire extinguisher, and first put the fuel tank and the burningPartially cool down to extinguish the fire to avoid explosions. When smoke is found under the hood, the hood cannot be opened.